s eries am epr60 c - az up to 5a | ac- dc / dc - dc | led driver / converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3 .c 1 of 7 north america only features: models single output model output voltage range (v) output current (a) input voltage (vac/hz) input voltage (v d c) mode of operation ocp / ovp max output power (w) efficiency (%) amepr60c - 50120az 36-50 0 - 1.20 90 - 305 / 47 - 440 1 3 0 - 430 constant current 1.27 60 89 50.7 amepr60c - 36170az 24-36 0 - 1.70 90 - 305 / 47 - 440 1 3 0 - 430 constant current 1.77 59.8 88 36.6 amepr60c - 24250az 12-24 0 - 2.50 90 - 305 / 47 - 440 1 3 0 - 430 constant current 2.55 60 87 24.5 amepr60c - 12500az 5 -12 0 - 5.0 90 - 305 / 47 - 440 1 3 0 - 430 constant current 5.2 60 8 5 12.3 exceeding the maximum output power will permanently damage the converter the dimming feature is not supported when units are used in constant voltage mode only. in constant current mode output current is maximum shown, in constant voltage mode output voltage is the maximum shown. all models can be ordered with optional north american colour input wires ( black (l) , white (n) , green (gnd)) . add C na to part number when ordering. note: aimtec limited warranty of 5 years is valid based on product operati on at datasheet specifications at ambient temperature of 25c, humidity<75%, nominal input voltage (115/230/277vac) and at rated output load unless otherwise specified. see http://www.aimtec.com/terms - sale amepr60c - azs ac/dc led drivers have electrical safeguards designed within to protect it from conventional electrical abnormalities wi th the levels listed in the safety table. applications for use within rural agricultural, heavy industrial, and other a reas or regions which are prone to dirty electrical conditions which would subject any of the above models to excessive voltages surges or spikes, may dama ge or cause early life failure of product. in this case consideration should be made by the end use r to ensure that adequate line or mains surge suppression is installed in front of aimtec device to ensure the longevity of the products. failure to identify excessive li ne surges violations prior to installation may damage sensitive equipment permanently . i nput specifications parameters conditions typical maximum units inrush current <2ms 115vac 30 a 230vac 5 0 leakage current 115vac 0. 5 ma 230vac 0. 7 ac current 115vac 0. 73 a 230vac 0. 33 power factor 115vac 0. 97 230vac 0. 93 external fuse 250v/1.5a start up time 250 ms surge voltage 2sec 440 v ? ac - dc constant c urrent or constant voltage led driver ? over temperature protection ? over current protection ? input range 90 - 305vac /47 - 440hz ? waterproof case rated ip6 8 ? high efficiency up to 89 % ? operating temperature - 40 to 85c ? dimmable via res istive / 0 - 10vdc / pwm ? 5 years limited warranty ? power factor correction ? short circuit protection click on series name for p roduct info on aimtec.com
s eries am epr60 c - az up to 5a | ac- dc / dc - dc | led driver / converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3 .c 2 of 7 north america only output specifications parameters conditions typical maximum units current accuracy (cc mode) 3 % voltage accuracy (cv mode) 3 % line regulation ll - hl 1 % load regulati on 0 - 100% load 3 % ripple & noise 20mhz bandwidth 75 mv p - p hold - up time 90 ms current adjustment range 100 - 0 % minimum load voltage see the models table tested with 0.1f (c/c) or (m/c) and 47f (e/c) parallel capacitors at the end. isolation specifications parameters c onditions typical rated units tested i/o voltage 3 sec/3.5ma 3000 v ac isolation resistance 500vdc >1000 m isolation capacitance 1000 pf general specifications parameters conditions typical maximum units switching frequency 130 khz over curren t protection 105 % over voltage protection 110% of vout % short circuit protection continuous short ci rcuit restart auto recovery over temperature protection > 105 c operating temperature with derating over 55c - 40 to + 85 o c maximum case temper ature 100 o c storage temperature - 40 to +95 o c t emp era ture coefficient 0.02 % / o c cooling free air convection humidity 95 % rh c ase material plastic potting e poxy (ip67 rated) wires ul1015 18awg *20cm weight 530 g dimensions (l x h x w) 5.30 x 2.27 x 1.59 inches 134.80 x 57.68 x 40 .50 mm mtbf >400,000 hrs (mil - hdbk - 217f at +25c) safety specifications parameters agency approvals culus, ce standards ul8750, ul60950 - 1, en550 22 , class b , en60529(ip68), en61347 - 1, en61347 - 2 - 13 i nformation technology equipment en55022 class b harmonic current emissions iec/en 61000 - 3 - 2 , class c voltage fluctuations and flicker iec/en 61000 - 3 - 3, (en60555 - 3) electrostatic discharge immunity iec 61000 - 4 - 2 level 3 rf, electromagnetic field imm unity iec 61000 - 4 - 3 level 2 electrical fast transient / burst immunity iec 61000 - 4 - 4 level 2 surge immunity iec 61000 - 4 - 5 level 3 rf, conducted disturbance immunity iec 61000 - 4 - 6 level 2 power frequency magnetic field immunity iec 61000 - 4 - 8 level 1 voltage dips , short interruptions immunity iec 61000 - 4 - 11
s eries am epr60 c - az up to 5a | ac- dc / dc - dc | led driver / converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3 .c 3 of 7 north america only dimensions 60.00 (2.36) 137.33 (5.41) 40.50 (1.59) 161.30 (6.35) 200.00 (8.00) 200.00 (8.00) 2.30 (0.09) 40.50 (1.59 ) 60.00 (2.36) 16.75 (0.66) end view top view side view 32.00 (1.26) input/output wires are 18 awg 20cm temperature g raph - 40 - 20 0 20 40 60 80 100 100 80 60 40 20 0 free air convection 55 o c safe operating area ambient temperature o c 85 output power %
s eries am epr60 c - az up to 5a | ac- dc / dc - dc | led driver / converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3 .c 4 of 7 north america only dimming control c versions amepr60c - 50120az
s eries am epr60 c - az up to 5a | ac- dc / dc - dc | led driver / converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3 .c 5 of 7 north america only amepr60c - 36170az
s eries am epr60 c - az up to 5a | ac- dc / dc - dc | led driver / converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3 .c 6 of 7 north america only amepr60c - 24250az
s eries am epr60 c - az up to 5a | ac- dc / dc - dc | led driver / converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3 .c 7 of 7 north america only amepr60c - 12500az note: 1. datasheets are updated as needed and as such, specifications are subject to change without notice. once printed or downloaded, datasheets are no longer controlled by aimtec; refer to www.aimtec.com for the most cur rent product specifications. 2. product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. mechanical drawings and specifications are for reference only. 4. all specifications are measured at an a mbient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specifie d. 5. aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishi ng this document. cas numbers and other limited information are considered proprietary and may not be available for release. 6. this product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear contr ol systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. warranty is in accordance with aimtecs standard terms of sale available at www.aimtec.com.
|
